Wednesday, July 25, 2012
X-Treme X-360 user's Guide
Put the seat post and seat in the seat post receiver, and install the trunk rack then on the back of scooters. Sure pull the seat post clampTheir roller is loaded from the box. We recommend charger for 6-8 hours before its first use continue. We recommend also the elevation of your roller after every use and before saving.
On the dashboard, a master makes/kill switch located close to the ignition. This switch are allowed to operate on the scooter and while loading. This switch will cut all power to the motor.When first plugged in the charger has on two red lights is lit at the same time, indicating that the charging has started. As soon as the light on the charger turns green, can the charger to remove and close the safety Cap.The X 360 used a hub brake on the rear wheel of the scooter activated by a lever hand brake on the left side of the handlebar. Squeezing the hand brake lever with his left hand activates the rear brake. Make sure the THROTTLE grip let go to engage the brakes. get here
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.