Guide Information Blogs

Note that the Sprinter Service Manual states that the heat shield should also be removed to make room for the air filter housing. However, that is not necessary. The trick: Wiggle the top around so that the hump is between the windshield washer and the interior fan casing, and bring the flanges up over the heat shield and headlight frame. The picture shows the angle to aim for. Slide out the top.several places on this heat shield and the one between the muffler and the body of the van to dampen the aluminum shields pinging sounds from heat expansion and cooling contraction.) Clean out the supply side of the air filter housing. I found a shop vacuum was the quickest. Install new filter, and replace the top of the air filter housing. Careful on the reinstallation, as the lower left corner often hangs up on the electrical harness located near that corner. Reinstall the spring clips, air mass sensor and air feed line.DC offers as an option an air flow indicator to inform owners of when to change the air filter. It is located on the top left of the air filter canister. Even though my old filter (the lower one in the picture above) appeared to be dirty and had 28,000 miles on it, the air flow indicator showed no problem. So what to believe? Other members of the Yahoo Sprinter Group also report bafflement as to whether this feature works.

Download: 2001-2003 Changing the Air Filter on a Sprinter Manual

Related Posts : Dodge