Wednesday, July 25, 2012
X-Treme XG-499 user manual
Use the enclosed bolts and nuts, fixing of the gas tank on the right side of the rear frame. Run the gas lines to the frame to the engine it gently stuffed under the rear fenders.The scooter comes with 2 seat posts. It is inserted into the underside of the seat and and secured by tightening the nuts. The second Seatpost is inserted into the opening on the back/engine framework. Drag down the post in place with the supplied Allen wrench
Pushing to secure the seat post clamp on the bottom post and insert the upper seat post and attached seat in the low post and place by tightening the clamp. You can easily adjust the height by loosening the clamp and move to the top or bottom of the seat, then pull the bracket.Attach part of engine and rear frame.Have a second person to keep engine/rear light out of the ground the framework, set the attached screw Thrum the holes on the side of the rear frame and into the pipe on the front frame. Tighten the nuts securely at each end. get here
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.