Guide Information Blogs

Insert handles in bar T-frame as shown in Figure 3 shows. Make sure that pin snap-in, and lock, the small holes in the top of the T frame. With the bar in the vertical & locked position and the rider on the plat out with one HAND ON THE brake standing adjust handlebar height to just below the waist line of the driver.This is done by loosening the height display user (Figure 3) in the bar keep... move the handlebars on the (d) height and height adjuster tighten desire. Be careful that height adjuster is.Recharge procedure

In the order with charger in hand, find the charging socket under roller (fig. 4). Connect the charger to charger connect. Then connect the charger into a standard 110/220 v electric our loft. Recharge temperature 50 to100F. Unplug from the wall outlet and then roller charger and replace cap of the Charger Socket see diagram not OVER CHARGER after. get here