Friday, January 16, 2009
Download Manual »
Home »
Samsung CLP 510
»
Samsung CLP 510 Waste Toner Error
I've just gone through the whole deal with Samsung canada
trying to get the issue resolved, however in the end I have
given up and implemented my own solution.
I found that the "new" old toner entering the tank passes
through the sensor "bump" and makes it dirty even when the tank
is not full .... My solution involves a simple foil baffle
which prevents this - has worked perfectly ever since, when
before I was plagued with "replace waste toner bin" messages
no matter how often I cleaned out the tank.
I've put up a little web page with some photos describing this
fix, as well as a means by which you can reset the toner
cartridge page counts without having to disassemble the cartridge
or replace the chips at:
www.dunfield.com/clp510
Hope it helps.
Regards,
Dave
Samsung CLP 510 Waste Toner Error
trying to get the issue resolved, however in the end I have
given up and implemented my own solution.
I found that the "new" old toner entering the tank passes
through the sensor "bump" and makes it dirty even when the tank
is not full .... My solution involves a simple foil baffle
which prevents this - has worked perfectly ever since, when
before I was plagued with "replace waste toner bin" messages
no matter how often I cleaned out the tank.
I've put up a little web page with some photos describing this
fix, as well as a means by which you can reset the toner
cartridge page counts without having to disassemble the cartridge
or replace the chips at:
www.dunfield.com/clp510
Hope it helps.
Regards,
Dave
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.