Guide Information Blogs

Hi,

I would like like to refill the cartridges for the HP D1460 printer.

The cartridges are chipped. Is there a way around this?

Thanks
Reply With Quote

I've got a new HP all in one printer, C5280, which I am very pleased with.

With my old Epson, paper was loaded in a top tray at about a 60 degree
angle and came out the front; the HP paper is loaded flat in the front
and it appears to be turned through 180 degrees before being ejected at
the front.

Now the machine is not that big so the paper turn must be quite tight
and I would have thought this may be a problem with labels.

Any comments, positive or negative, about this system.

Geoff Lane

I just tore into mine and found the battery and I am just waiting an hour to re-install it so I can't tell you for sure if it worked for me. But this is how you get to the battery. From the rear of the printer remove the rear feeder by depressing both buttons and lifting away from the body of the printer. Next remove the right darker grey cover by removing two T-20 Torx head screws, one on top and the other under the feeder tray you just removed. Slide the cover back about an inch and then pull out. Under that cover you will see a metal plate mounted vertically that has three T10 Torx screws that you will need to remove.

Once you have done that you can tip that plate out and see the battery. Depending on how nimble your fingers are you can determine if and which cables you need to unplug to get to the battery. With my fat hands I needed to remove 4 of the cables that plug into that board. Once I did that I was able to get to the battery and pulled it out. It looks just like the one pictured on the other site. Hopefully I haven't done anything to fry a component. I will write again in a while and let you know how it turned out.