Showing posts with label Brother MFC 7220. Show all posts
Showing posts with label Brother MFC 7220. Show all posts
Wednesday, January 7, 2009
back cover open Error Brother MFC 7220
* Open the back cover
* Pull the flap down that hides the orange roller on the fuser
(Careful it's Hot on that fuser!!)
* Locate the thin piece of plastic that runs from the centre to the right hand side. This bar is the problem
* 3/4 along the right hand side, there is a sticky out bit on this bar that should sit in a hole.
* I have found three printers where this was not located properly. Once I located it properly, the 'door open' error went away.
Read More..
* Pull the flap down that hides the orange roller on the fuser
(Careful it's Hot on that fuser!!)
* Locate the thin piece of plastic that runs from the centre to the right hand side. This bar is the problem
* 3/4 along the right hand side, there is a sticky out bit on this bar that should sit in a hole.
* I have found three printers where this was not located properly. Once I located it properly, the 'door open' error went away.
Subscribe to:
Posts (Atom)