Guide Information Blogs

Jeep Tummy Tucker-TJ Rubicon Service Manual Any lift kit being used does not require center skid plate-mounted control arms.A double-Cardan (incorrectly aka ‘CV’) rear drive shaft is installed and the pinionangle adjusted for use of this drive shaft via a Stinger or adjustable rear controlarms, etc. (If you have ZERO suspension lift on your Rubicon, you can use thestock driveshaft).An original Rubicon transmission is used: NV3550 (5-spd. manual), or 42RLE (4-spd. auto.)AssumptionsEquipment that mustalready be presenton your WranglerThe standard-for-Rubicon NV241J ‘Rock-Trac’ transfer case is used.Floor jack and ~12″ piece of 4×4 post (or vehicle lift with a tall jackstand)Set of Allen ‘hex drive’ keys (including 8mm).Long pry bar or equivalent (autos only)Required Toolsand Equipment (inaddition to commonhand tools)Ratchet Strap, rope, etc. (see step 4)NOTE : If you have anything other than a ’03-06 TJ Wrangler Rubicon with the original trans andNV241OR ‘Rock Trac’ t-case, you have the wrong instructions (make sure you don’t also have the wrongTT!).

 download from here

Related Posts : jeep